How to set up Cloud Cast TV / Anycast  for IOS & Android Devices

Anycast dongle allows you to stream content from your smartphone, tablet or PC to your TV. It features a screen mirroring function
as well as DLNA and Airplay® for an almost universal ability to stream media from a compatible device.

Through the casting functionality, play YouTube, videos, pictures and other streaming services straight onto your TV.
MIRACAST: Mirrors the display of your device on your TV or projector.
DLNA: Streams pictures, videos and music from your device to your TV or projector.

 

DONGLE INSTALLATION
1) Connect the dongle to power by using either
a power adaptor (with a Micro USB plug) or the
included USB power adaptor.
2) Plug the dongle into the HDMI port of your
TV or projector.
3) Switch your TV or projector’s input source to
HDMI. The dongle’s main menu should appear
on the screen.
4) Once you have paired the dongle to your
device, we recommend connecting the dongle
to your wireless router for internet access.

IOS DEVICES
Device Compatibility:
iPhone 4 onwards
iPad 2 onwards
iPod touch 4th generation onwards
System Requirements:
iOS 7 and above
Minimum of 40MB memory required
Resolution
iPhone: 480*320~1136*640
iPad: 1024*768~2048*1536
IOS DEVICE PAIRING:
1) Navigate to your device’s Bluetooth menu &
look for the dongle’s SSID (e.g. AnyCast-xx).
2) Select the SSID to pair with your device. If
you cannot see the dongle, try pressing the
button on the back of the dongle to reset.
3) If prompted for a password, enter 12345678.
4) Once your device is paired, the dongle menu
should display on the device’s screen as
follows:
– Touch icon to connect dongle to Wi-Fi AP
– Touch icon to switch between Miracast &
DLNA
– Touch icon to show media control panel
– settings
5) To activate AirPlay, swipe up from the bottom
of your screen to open your device’s Control
Center, and tap AirPlay.
6) Your device’s screen should now appear on
your TV or projector.

ANDROID DEVICES
Device Compatibility:
Bluetooth enabled smartphones
Bluetooth enabled tablets
System Requirements:
Android 4.2 model with 1GB RAM
Minimum of 40MB memory required
Resolution
WVGA~1080p
ANDROID DEVICE PAIRING:
1) Navigate to your device’s Bluetooth menu
and look for the dongle’s SSID (e.g. AnyCastxxxxxx).
2) Select the SSID in order to pair with your
device. If you cannot see the dongle, try
pressing the button on the back of the dongle to
reset.
3) If prompted for a password, enter 12345678.
4) Once your device is paired, the dongle menu
should display on the device’s screen as
follows:
– Connect dongle to Wi-Fi AP
– Switch between Miracast & DLNA
– Show media control panel
– Settings
5) Your device’s screen should now appear on
your TV or projector.
CONNECTING THE DONGLE TO YOUR WI-FI
ROUTER:
1) Open your device’s internet browser and
visit: “http://192.168.49.1” or use your device to
scan the QR code below.
2) Click on the signal icon (which should link the
dongle to your Wi-Fi router). You should only
have to follow this process once.